In this report we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at a number of the more advanced tips and tricks which you can use.
If you have a dog that likes to bark, and particularly if your dog loves to play in the garden and other areas of the house, you will need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up that will look a little scary at first, but it’s really very straightforward. All you have to do is take a cardboard cutting board and cut mask for dog inhalers the cardboard into the shape of your mask. You can’t simply cut a rectangular shape from the cardboard, so you will need to cut around the edge of the mask so you get something which resembles a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.
Then you’ll have to wrap the cardboard around the edges of the paper plate, making certain there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Be sure the edges are cut so the edges aren’t sharp, as this may damage the edges of the mask.
Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask first, so you can work your way around it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs across the cardboard.
Don’t worry too much about the paint getting stuck to your mask. It’s easy to remove it later, and it’ll leave you with a nice finished mask to show off to everybody! It’s also a good idea to wash away any excess paint after you’re done, so you don’t end up with smudges or smears on your dog.
Then it’s time to glue the mask on your dog’s head. First you need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you may start to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and fold it over. Make certain it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged firmly onto the surface of your dog. Don’t make the folds too big or else it could look messy. Once you’ve completed this, you can then take out the mask and then attach the cardboard ears. And attach the other area of the mask on the dog. Be sure the ears are level and be certain it is not too short or long as this will cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask as your pet security, you will need to do some sanding to make sure that it is safe on your dog. You can accomplish it by sanding off any excess paper that may have been removed from your mask.